Department of Civil Engineering Technology

Article Index

 
MAIN PAGE

 PROGRAMME OFFERED

    • Bachelor Degree of Civil Engineering Technology (Building Services) with Honours
    • Bachelor Degree of Civil Engineering Technology (Environmental) with Honours
    • Bachelor Degree of Civil Engineering Technology (Construction) with Honours

 

 

banner JTKA new

 

 PROGRAMME DESCRIPTION
 
 
BNA

Bachelor of Civil Engineering Technology in (Building Services) with Honours is aims to produce graduates who are competent, independent and mature to meet nation's needs for skilled professionals and experts in the field of civil engineering technology for the public and private sectors or even self-employed. This program is designed to be consistent with the vision and mission of the University. Through this program, the graduates are expected to be part of the talent that will propel the development of the state in accordance with the aspirations of Vision 2020. This is made possible with the availability of courses emphasizing new technologies that covers the theory and practical skills needed in this field. The students of this program are also exposed to the variety of activities that can boost their generic skills.

 

BNB

Bachelor of Civil Engineering Technology (Environment) with Honours is aims to produce graduates with both engineering and applied sciences knowledge and skills to investigate, plan, design, manufacture and maintain the systems and equipments used in various aspects of environmental solutions. As oppose to other Environmental Engineering degree programmes, this unique programme is designed to offer graduates who are more focused on the technologies and systems that make up a good environmental solutions to meet demand for skilled professionals in plants, manufacturing, consultants, education and management in the public, private or self-employed sectors. In order to produce the graduates with excellent theory and practical skills, this programme is also expected to prepare the graduates with generic skills consistent with the vision and mission of the University.

 

BNC

Bachelor of Civil Engineering Technology (Constructions) with Honours is aims to produce graduates who are competent, mature and exposed with knowledge and technical skills based on the latest technology to meet the demand of current market. The program is structured to be more practical than the conventional pure engineering degree program. The students of this programme will be exposed to planning, design, managing and inspection of construction such as buildings, roads, dams, bridges and airports. This program is designed and emphasized on the practical applications of civil engineering principles. The student of this program undertake courses such as engineering mechanics, surveying, computer aided design, structural design, materials, soils, hydrology and construction technology. Most of these courses are the integration of field, laboratory and workshop activities that could enhance the understanding of the civil engineering technology applications in constructions. The industrial training (1 semester) in public or private companies allows graduates to enhance their skills and preparing themselves for their future career. 

 

JOB PROSPECT

The building services teams work closely with other engineering disciplines, architects, structural engineers and quantity surveyors on construction projects. The range of services required in our modern buildings is continuously expanding offering building services engineering graduates a challenging and rewarding career choices and the chance to play a dynamic role in the future of our environment.

On the other hand the environment sector are required in large numbers of area from process engineering, environmental chemistry, water and wastewater treatment, waste reduction management to pollution prevention. Professional graduates from this programme are able to work with government, private agencies, non-government organization (NGOs) and they are also bright in research and development (R&D) area working towards maintaining clean environment, green development and sustainable growth for our future.  

The graduates from the construction will have opportunities to work in government and private agencies. They could be engineering technologists in government sector and engineer in private sectors. They are also able to work with contractors and consultants in the construction industries. In field of R&D, the graduates are able to be research officers in government and private sectors. 

 

ADMISSION REQUIREMENTS & FEES

  


 ACADEMIC PROFORMA & BROCHURE (DOWNLOAD)

 

 


 LABORATORIES & FACILITIES IN JTKA

  1. Bengkel Teknologi Konkrit/Concrete Technology Workshop (Location: 2.F.1.001)
  2. Bengkel Teknologi Fabrikasi Besi / Steel Fabrication Technology Workshop(Location: 2.F.1.008)
  3. Makmal Teknologi Kejuruteraan Air Dan Air Sisa / Water and Wastewater Engineering Technology Workshop (Location: 2.F.1.020)
  4. Bengkel Teknologi Kejuruteraan Komposit / Composite Technology Workshop (Location: 2.F.1.029)
  5. Bengkel Teknologi Kejuruteraan Struktur Berat / Heavy Structure Engineering Technology Laboratory (Location: 2.F.1.036)
  6. Makmal Teknologi Kejuruteraan Sumber Air/ Water Resource Engineering Technology Laboratory (Location: 2.F.1.042)
  7. Makmal Teknologi Kejuruteraan Mekanik Bendalir/ Fluid Mechanic Engineering Technology Laboratory (Location: 2.F.1.047)
  8. Bengkel Teknologi Kejuruteraan Perpaipan / Piping Engineering Technology Laboratory (Location: 2.G.1.002)
  9. Bengkel Teknologi Perabot / Furniture Technology Workshop (Location: 2.G.1.008)
  10. Makmal Teknologi Kejuruteraan Geoteknik / Geotechnical Engineering Technology Laboratory (Location: 2.H.1.037)
  11. Makmal Tekonologi Kejuruteraan Perkhidmatan Bangunan / Building Service Technology Laboratory (Location: 2.G.1.018)
  12. Makmal Teknologi Kejuruteraan Geomatik / Geomatic Engineering Technology Laboratory (Location: 2.G.1.036)
  13. Makmal Teknologi Kejuruteraan Jalan Raya / Highway Engineering Technology Laboratory (Location: 2.G.1.042)
  14. Bengkel Teknologi Masonri / Masonary Technology Laboratory (Location: 2.G.1.051)
  15. Bengkel Teknologi Kejuruteraan Perkayuan / Wood Engineering Technology Laboratory (Location: 2.G.1.060)
  16. Makmal Teknologi Kejuruteraan Alam Sekitar / Environment Engineering Technology Laboratory (Location: 2.G.1.070)
  17. Makmal Tekonologi Struktur Ringan / Light Structure Engineering Technology Laboratory (Location: 2.G.2.003)
  18. Makmal Teknologi Kejuruteraan Pencemaran Udara / Air Pollution Engineering Technology Laboratory (Location: 2.G.2.016)
  19. Makmal Teknologi Kejuruteraan Trafik / Traffic Engineering Technology Laboratory (Location: 2.G.2.021)
  20. Makmal Lukisan Teknologi Kejuruteraan Awam 2/ Drawing Civil Engineering Technology Laboratory 2 (Location: 2.G.3.001)
  21. Makmal Lukisan CAD Kejuruteraan Awam 2 / Civil Engineering CAD Laboratory 2 (Location: 2.G.3.004)
  22. Makmal Lukisan CAD Kejuruteraan Awam 1 / Civil Engineering CAD Laboratory 1 (Location: 2.G.3.005)

 

CONCRETE TECHNOLOGY WORKSHOP

c2

Instruments/Equipments: 

  1. Static Hydraulic Universal Testing Machine: ideal material testing instrument to determine tensile, compression and bending strength for a wide range of materials and applications.
  2. Semi Auto 3000kN Compression Machine: range of compression testing machines have been designed for reliable and consistent testing of a wide range of specimens.
  3. Seive Shaker: impart a circular motion to the material being sieved so that it makes a slow progression over the surface of the sieve. They are ideal for on-site and heavy duty applications when heavy or large bulk samples are to be analysed.
  4. Planetary Mono Millpulverisette & Classic Line: A high-performance Planetary Ball Mill with a single grinding bowl mount and practical, easily adjustable imbalance compensation. Particularly easy use and high-energy effect of up to 650 rpm.

Contact person:
Ir. En. Mohammad Hairi Bin Osman
En. Hazri Bin Mokhtar

STEEL FABRICATION TECHNOLOGY WORKSHOP

makmal steel

Instruments/Equipments: 

  1. Bar Bender Machine:Bending on steel bar material from 0 until 180 degree with the limit pin. Available capacity: 32mm & 42mm
  2. Bar Cutter Machine:Cutting on steel bar material.Available capacity: 32mm & 42mm.

Contact person:
En. Mohd Sufyan Adbullah
En. Mohamad Zayani Zakwan Mohd Zin

WATER AND WASTEWATER ENGINEERING TECHNOLOGY WORKSHOP

makmal water and waste water

Instruments/Equipments: 

  1. Drinkable Water Treatment Proces Pilot Plant: The conventional treatment pilot plant is a gravity flow, dual-train conventional treatment plant.
  2. Fume Hood: A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.
  3. Horizontal Cylindrical Pressure Steam Sterillizer: WS series horizontal pressure sterilizer is the equipment that disinfects and sterilizes the objects with saturated steam, its structure is horizontal and heating way I; electric heating and direct steam heating.
  4. Reverse Osmosis Unit: Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, molecules and larger particles from drinking water.
  5. Buchi Kjeldahl System: The determination of total Kjeldahl Nitrogen (TKN) in water and waste water is a routine procedure used to ensure water quality.

Contact person:
En. Zarizi Bin Awang
Pn. Nadia Kasim

COMPOSITE TECHNOLOGY WORKSHOP

makmal composite


Instruments/Equipments: 

  1. Radial Arm SAW: Radial arm saw are used for wood cutting with saw-head can be set firmly at any angle desired. Available options included conveyor tables and measuring systems.
  2. Spray Booth: Spray booth are for painting small component.
  3. Woodworking Thicknesser:  Woodworking thicknesser are used to reduce wood size depends on the usage of the wood and producing flat surface.
  4. Finger Joint Machine: Finger joint machine are for joint the same width , thickness, length wood into long board.

Contact person:
En. Mohd Sufyan Adbullah
En. Mohamad Zayani Zakwan Mohd Zin

HEAVY STRUCTURE ENGINEERING TECHNOLOGY LABORATORY


Instruments/Equipments:

Contact Person:
Ir. En. Mohammad Hairi Bin Osman
En. Hazri Bin Mokhtar

 

 WATER RESOURCE ENGINEERING TECHNOLOGY LABORATORY

makmal water resources


Instruments/Equipments: 

  1. Hydrology Study System Apparatus: Hydrology Study System Apparatus can be used to study seepage and groundwater flows after precipitation.
  2. Open Channel: Open Channel is used to demonstrate different flow processes at different control structures in the open channel.
  3. Francis Turbine:Francis Turbine is a reaction turbine. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine.

Contact Person:
En. Zarizi Bin Awang
Pn. Nadia Kasim

FLUID MECHANIC ENGINEERING TECHNOLOGY LABORATORY

makmal fluid


Instruments/Equipments: 

  1. Flow Over Weir Apparatus: To investigate the discharge-head characteristics of a rectangular and triangular weirs.Static Hydraals and applications.
  2. Flow Through Orifice Apparatus: Allows to measure the Decrease in Flow, Contraction of the Stream and Energy Loss.
  3. Impact of Jet: The Impact of a Jet apparatus shows the force produced by a jet of water as it strikes a flat plate or hemispherical cup,hence then compare this to the momentum flow rate in the jet
  4. Venturi Meter: Venturi meters are flow measurement instruments which use a converging section of pipe to give an increase in the flow velocity and a corresponding pressure drop from which the flowrate can be deduced. They have been in common use for many years, especially in the water supply industry

Contact person:
Dr. Mohd Arif Bin Rosli
Pn. Faeqatul Nabila Zubir

PIPING ENGINEERING TECHNOLOGY LABORATORY

makmal paip


Instruments/Equipments:

  1. Power Threading Machine: To versatility for threads black, galvanized and
    plastic coated pipe, stainless steel, IMC,
    heavy-wall conduit, and rod up to RC 30.
  2. Portable Trish and Vise: Each TRISTAND pipe vise features integral folding legs for easy transport and setup, tool hangers and a base which overhangs the front legs for clear tool swing.
  3. Water Leak Detector: to detect the presence of water and provide an alert in time to allow the prevention of water leakage.
  4. Bench Drilling Machine:The bench drill is a smaller version of the pillar drill. This type of machine drill is used for drilling light weight pieces of material
  5. Water Pressure Pump Tester: For detecting a loose connection of mechanical joints and insufficient tightening of polybutene pipe. To find missing or insufficient epoxy application at the joint of vinyl chloride pipes.
  6. Portable Electric Threader: hand-held power drives provide on demand pipe fabrication for the jobsite.

Contact person:
En. Hilmi Bin Kosnin
En. Muhammad Khairul Fitri Bin Sarimin

FURNITURE TECHNOLOGY WORKSHOP

makmal furniture


Instruments/Equipments: 

  1. Table Saw: A table saw or sawbench is a woodworking tool, consisting of a circular saw blade, mounted on an arbor, that is driven by an electric motor (either directly, by belt, or by gears). The blade protrudes through the surface of a table, which provides support for the material, usually wood, being cut. 
  2. Automatik Wide Belt Sanders: The calibration phase allows for any reduction in the thickness of the panel by removing a layer and ensuring it is perfectly straight; while the sander renders the surface completely smooth.
    Both phases take place as the panel passes under the abrasive belts that are of varying degrees of abrasiveness depending on how much material needs to be removed and the type of wood being worked.
  3. Motrising Chisel Machine: A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.
  4. Dust Extractor: Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.

Contact person:
En. As-Shar Kasalan
En. Muhammad Khairul Fitri Bin Sarimin

GEOTECHNICAL ENGINEERING TECHNOLOGY LABORATORY


Instruments/Equipments: 

  1. Direct Shear: To determine the parameter of shear strength of soil, cohesion, and angle of friction, ø.
  2. Consolidation: To determine the consolidation characteristics of soils of low permeability.
  3. Permebility Constant & Falling Head: To determine permeability of soils of intermediate and low permeability (less than 10-4 m/s), i.e. silts and clays.
  4. Semi Cone Penetrometer: To determine the liquid limits of soil using cone penetrometer methods.
  5. IAQ Monitor: To measure indoor air quality and CO2
  6. 4 in 1 Meter Kit: To measure humidity, temp, lux and velocity.
  7. Solar Energy Trainer: Fundamentals of a solar cell and conversion of the sun photons into electrical energy.
  8. Fire Alarm Trainer: Smoke detector, Heat Sensor, Siren Flasher

Contact person:
Dr. Mariah Binti Awang
En. Mohd Faizal Riza Bin Kamian

 BUILDING SERVICE TECHNOLOGY LABORATORY

makmal building services


Instruments/Equipments: 

  1. IAQ Monitor: To measure indoor air quality- CO2, CO, temp.
  2. 4 in 1 Meter Kit: To measure humidity, temp, lux and velocity.
  3. Solar Energy Trainer: The solar energy trainer introduces the fundamentals of a solar cell and conversion of the sun photons into electrical energy. This can be monitored with a built in voltmeter and ammeter to measure the voltage and current produced. The trainer allows the study of the characteristic and application of solar energy and the charge of batteries using solar energy.
  4. Fire Alarm Trainer: To work with smoke detector/sensor, work with heat detector/sensor, work with siren flasher.

Contact person:
Dr. Mariah Binti Awang
En. Mohd Faizal Riza Bin Kamian

GEOMATIC ENGINEERING TECHNOLOGY LABORATORY

makmal geomatik


  • Instruments/Equipments: 
  1. Total Station: A total station is an electronic/optical instrument used in modern surveying and building construction that uses electronic transit theodolite in conjunction transit theodolite in conjunction with electronic distance meter (EDM). It is also integrated with microprocessor, electronic data colecctor and storage system. 
  2. Auto Level: A dumpy level, builder's auto level, levelling instrument, or automatic level is an optical instrument used to establish or verify points in the same horizontal plane. It is used in surveying and building with a vertical staff to measure height differences and to tansfer, measure and set height.
  3. Surveying Prism:This offset is the most advantageous at close range work when the apex or center of the prism is used as a pointing target for vertical and horizontal angle measurement. Every surveying prism has a nodal offset.

Contact person:
En. Abd Syukor Bin Sarif
Pn. Nur Ain Mohamad

HIGHWAY ENGINEERING TECHNOLOGY LABORATORY

makmal highway


Instruments/Equipments: 

  1. Asphalt Rotary Film Oven: Determination of road oil asphalt, rotary film oven heating on the impact of viscous asphalt. b)Determine the rotating film after heating asphalt residue.Max. Temperature: 200°C.
  2. California Bearing Test Machine: Determination of CBR ratio of undisturbed soil specimen obtained from the field. b)Remoulded specimen of the soiled compacted in the laboratory both in soaked and unsoaked state.
  3. Marshall Stability Test Machine: Measurement of the resistance to plastic flow of cylindrical speciments of bituminous paying mixtures loaded on the lateral surface. B) Used with hot mixtures containing asphalt or tar and aggregate. Max. size : 25mm.
  4. Automatic Compactor Machine: determination of resistance to plastic flow of fine aggregate bituminous mixtures. b)compaction of mixtures containing asphalt or tar and aggregate. Max. size : 25mm
  5. Digital Penetrometer: The instruments measures the hardness of bitumen according to EN 1426, ASTM D5, AASHTO T49.
  6. Pendulum Skid Tester TRRL: a) Road surface testing. b)Testing of new road surface materials. c) Testing of aggregates in the polished stone test. d)Testing of floors and pedestarian walkaways. e)Flooring materials product development. f)Testing of pavers, in the Flat Bed Polisher.
  7. Digital Ultrasonic Cleaner Manual: Remove dirt, grease, waxes and oil from lab instruments by ultrasonic frequency. Max. Time Cleaning: 30 minutes.

Contact person:
Pn. Noor Khazanah Binti Abd Rahman
Pn. Harina Md Amin

MASONARI TECHNOLOGY LABORATORY

makmal mansonary


Instruments/Equipments: 

  1. Interlocking Blockmaking Machine: Produce interlocking block with single block chamber.Available Mould : 220mm

Contact person:
En. Mohd Sufyan Adbullah
En. Mohamad Zayani Zakwan Mohd Zin

WOOD ENGINEERING TECHNOLOGY LABORATORY

makmal wood


Instruments/Equipments: 

  1. Table Saw: A table saw or sawbench is a woodworking tool, consisting of a circular saw blade, mounted on an arbor, that is driven by an electric motor (either directly, by belt, or by gears). The blade protrudes through the surface of a table, which provides support for the material, usually wood, being cut.
  2. Circular Arm Saw: The radial arm saw is a multi-purpose tool. It not only crosscuts and rips lumber but it can also be configured for use as a jointer, drill, router, sander, and lathe. The saws primary function is crosscutting. It can make a variety of crosscuts including: straight, miter, bevel, dadoe, and rabbet cuts.
    Both phases take place as the panel passes under the abrasive belts that are of varying degrees of abrasiveness depending on how much material needs to be removed and the type of wood being worked.
  3. Wood Planer:Generally all planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber. Planing is also used to produce horizontal, vertical, or inclined flat surfaces on workpieces usually too large for shaping, where the integrity of the whole requires the same smooth surface. Special types of planes are designed to cut joints or decorative mouldings.

Contact person:
En. Hilmi Bin Kosnin
En. Muhammad Khairul Fitri Bin Sarimin

ENVIRONMENT ENGINEERING TECHNOLOGY LABORATORY

makmal environment


Instruments/Equipments: 

  1. DR6000 Spectrophotometer: DR6000 offers high speed wavelength scanning across the UV and Visible Spectrum, and comes with over 250 pre-programmed methods
  2. Furnace: A furnace is a device used for high-temperature heating which is up to 500°C.
  3. Fume Hood: Fume Hood is used to protect lab environment and operator during general chemical applications. It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion.
  4. TL 2300 Turbidimeter: The TL2300 laboratory turbidimeter measures the scattered light from water samples to determine the turbidity value of the samples.
  5. Microbiological Incubator: An incubator is a device used to grow and maintain microbiologicalcultures or cell cultures. The incubator maintains optimal temperature, humidity and other conditions such as the carbon dioxide (CO2) and oxygen content of the atmosphere inside.
  6. BOD Incubator: BOD Incubator (Bio-Oxygen Demand) are used to maintain temperature for test tissue culture growth,storage of bacterial cultures and incubation where high degree of constant temperature accuracy is required.
  7. Laminar Flow: A laminar flow cabinet or laminar flow closet or tissue culture hood is a carefully enclosed bench designed to prevent contamination of semiconductor wafers, biological samples, or any particle sensitive materials.
  8. E-sampler: E-Sampler is a type of nephelometer which automatically measures and records real-time airborne PM10,PM2.5, or TSP particulate concentration levels using the principle of forward laser light scatter.
  9. DRB200 COD Reactor: The DRB200 thermostat ideally complements the Hach reagents (COD, TOC, Test 'N' tube).

Contact person:
Dr. Mohd Arif Bin Rosli
Pn. Faeqatul Nabila Zubir

LIGHT STRUCTURE ENGINEERING TECHNOLOGY LABORATORY

Instruments/Equipments: 

Contact Person:
Ir. En. Mohammad Hairi Bin Osman
En. Hazri Bin Mokhtar

AIR POLLUTION ENGINEERING TECHNOLOGY LABORATORY

makmal air pollution


Instruments/Equipments: 

  1. Multi Cyclone System (Model AP01): a) Determination of cyclone separation efficiency.   b) Effect of cyclone dimension. c) Single and series cyclone operations. 
  2. Venturi Scrubber System (Model AP02): a) Determination of separation efficiency. b) Effects of L/G ratio. c) Relationship between DP & inlet velocity.
  3. Spray Chamber System (Model AP03): a) Determination of separation efficiency. b) Effects of water droplet size and L/G ratios. c) Relationship between DP & inlet velocity.
  4.  Pulse-Jet Bag Filter System (AP04): a) Determination of separation efficiency. b) Effect of filtering area, G/C ratio & cleaning interval. c) Relationship between DP & inlet velocity.
  5. Electrostatic Precipitator (Model AP): a)Determination of collecting efficiency for different dust materilas. b) Effects of ionization strength.

Contact person:
En. Abd Syukor Bin Sarif
Pn. Nur Ain Mohamad

TRAFFIC ENGINEERING TECHNOLOGY LABORATORY

Instruments/Equipments:

Contact person:
Pn. Noor Khazanah Binti Abd Rahman
Pn. Harina Md Amin

CIVIL ENGINEERING TECHNOLOGY DRAWING LABORATORY 1 & 2

makmal CAD


Instruments/Equipments: 

  1. Horizontal Steel Plan Drawer (2 Units)
  2. Metal Bag Shelf (1 unit)
  3. Drawing Table (30 unit)

Contact person:
Ts. En. Mohamad Luthfi Bin Ahmad Jeni
En. Mohd Haizat Bin Bahari

COMPUTER APPLICATION CIVIL ENGINEERING LABORATORY

makmal computer application


Instruments/Equipments: 

  1. Trio Sliding Cutter (2 units)
  2. Laminate Machine (1 unit)
  3. Plan Hanger Stand (2 Units)
  4. Printer Series Plotter A1 (1 Unit)
  5. Smart Interactive Projector (2 Units)
  6. Ronald Jack 80' Floor Stand Screen (1 unit)

Contact person:
Ts. En. Mohamad Luthfi Bin Ahmad Jeni
En. Mohd Haizat Bin Bahari

CAD CIVIL ENGINEERING DRAWING LABORATORY 1 & 2

makmal CAD2


Instruments/Equipments: 

  1. Metal Bag Shelf ( 1unit)
  2. Shelf Locker (1 unit)
  3. Esteem Integrated Total Solution Deluxe (Version 9.2)\
  4. CWORK GO CMS Application
  5. STAAD.PRO Software

Contact person:
Ts. En. Mohamad Luthfi bin Ahmad Jeni
En. Mohd Haizat Bin Bahari

 


JTKA RESEARCH ACTIVITIES

SUSTAINABLE ENVIRONMENTAL TECHNOLOGY (SET) FOCUS GROUP

SET LOGO

Under the Department of Civil Engineering Technology, the Sustainable Environmental Technology (SET) Focus Group was form to concentrate on research activities related to environmental engineering technology and sustainability. Our vision is to become research excellence in generating and applying innovative discovery of science and technology for sustainable development.

SET ORGANIZATION CHART 

SET organisasi

  

BUILDING INTELLIGENT MANAGEMENT

BIM logo

Under the Department of Civil Engineering Technology, the Building Intelligent Managemet (BIM) Focus Group was form to concentrate on research activities related to Building modelling up to 4D (including time/program information), 5D (Cost information) and 6D (fasility management information). Our vision is to become research excellence in generating and applying innovative discovery of digital technology for sustainable development.

BIM acronym is used to denote two concepts Building Information Model (i.e. a shared information model) and  Building Information Modeling (i.e. an information management methodology). BIM currently is the most active field of Construction Informatics research globally. Building Information Modeling is a methodology that addresses the problems related to sharing of information, interoperability and efficient collaboration throughout the lifecycle of a building (i.e. from feasibility and conceptual design through to demolition and re-cycling stages). This well-known methodology has origins in two distinct but related fields. The first one is Computer Aided Design (CAD), the latter one is Representation of Building Product Information -in an organised manner-. Building Information Modelling has been realised as a process of managing a project through a single shared information backbone

 

 

EXHIBITION & COMPETITION

 

 

INTERNATIONAL RESEARCH AND INNOVATION SYMPOSIUM AND EXPOSITION (RISE) UTHM 2018

 Venue : UTHM Main campus, Parit Raja,  Batu Pahat, Johor. Date : 12 November - 13 November 2018. Time: 8 am - 5. pm. 

 

 

 

SITE VISIT PROJECT FOR MOU AT LAMAN DIRAJA PONTIAN, NATIONAL PARK TANJUNG PIAI SOLAR HYBRID ENERGY DESALINATION SYSTEM, DATARAN PONTIAN SUSTAINABLE TOILET

Date: 7 November 2018, Vanue: Majlis Daerah Pontian,Laman Diraja Pontian, Taman Negara Tanjung Piai, Pontian dan Tandas Awam Serbaguna Dataran Pontian 

 

 

MOU between Department of Civil Engineering Technology, Faculty of Engineering Technology, Universiti Tun Hussien Onn Malaysia, and Majlis Daerah Pontian and RN Technologies Sdn. Bhd.

 - Date: 12 Julai 2018, Vanue: Majlis Daerah Pontian.

MOU Web

 

 

 

 


 

 

 

 

 

 

 

 

 

 

Pertemuan pertama diantara Professor Adjung JTKA bersama staf JTKA

Profesor Adjung Dato’ Sr. Zulkefli Mohd Zain telah dilantik sebagai Professor Adjung bagi Jabatan Teknologi Kejuruteraan Awam, Fakulti Teknologi Kejuruteraan, UTHM Kampus Pagoh. Perlantikan ini berkuatkuasa dari 1 Januari 2018 sehinnga 31 Desember 2018. Dato’ Sr Zulkefli Mohd Zain, CEO Design Cost Consultants, telah dilantik berdasarkan pengalaman beliau selama 36 tahun dalam bidang industri pembinaan, perniagaan, dan pendidikan, amat bermanfaat untuk dikongsi bersama para pelajar.

Sesi perkongsian ilmu dan pertukaran pendapat ini diadakan pada 11 Februari 2018, di Bilik Mesyuarat 2, Aras 1, UTHM-Kampus Pagoh. Perjumpaan ini melibatkan Tuan Dekan, Ketua Jabatan, Ketua-ketua Program serta semua staf JTKA.Tujuan “sharing session” atau pertemuan pertama ini diadakan adalah untuk berbincang mengenai perkara-perkara yang dibangkitkan semasa akreditasi.

Selain itu, kursus-kursus yang terlibat iaitu Engineering Economy, Integrated Construction Project (ICP) dan PSM turut akan dibincangkan dalam sesi ini. Sebarang tarikh atau perancangan untuk menjemput Dato’ Zul pada masa akan datang dapat dikemukakan. Objektif utama pertemuan ini adalah perkongsian ilmu serta pertukaran pendapat bersama ketua-ketua program dengan Profesor Adjung. Disamping itu, perbincangan bersama staf JTKA bagi memantapkan pengajaran dan pembelajaran pelajar.

6b      6c

 

INDUSTRIAL TALK:

‘Project Financing: Construction Project Financing with Special Reference to PFI Projects’

This industrial talk aims at providing the student with advanced concepts of engineering economic analysis and its role in engineering decision making. It is designed to offer the students the information needed for rigorous presentation of the effect of the time value of money on engineering problem solving and the capacity to act with ethical and efficient professionalism. Moreover, this talk will also provide

the students the information needed for their project. The talk presented include present worth analysis, annual cash flow, rate of return, future worth analysis, and payback period. Additionally, this industrial talk also covers topics such as financial planning, after tax analysis, economic optimization, project scheduling, legal and regulatory issues, and estimation of future events. This talk adds a compulsory knowledge for any project management professional in engineering fields.

190318 2 APDZ

 

TALK WITH ADJUNCT PROFESSOR DATO' SR. ZULKEFLI

Plant and Machineries and also about the Conditions of Contract

PAGOH : On 16th of April 2018, Dato’ Zulkefli had came to Universiti Tun Hussein Onn Malaysia (UTHM) Pagoh campus to give talks about the Plant and Machineries and also about the Conditions of Contract. Dato’ Zulkefli is the owner of the Design Cost Consultants the partnership company. He had more than 36 years of experience in construction industry, business and education. Besides, Dato’ Zulkefli also awarded plenty of awards such as the award of excellence. He had a lot of expertise such as in Quantity Surveyor, Project Management Consultant, Project Lead Consultant and others.

During the morning session, he first talked on the Plant and Machineries. He shared his own experiences on handling plant and machineries. He emphasized on planning of plant and machineries depending on the size of the project that are going to be done.

After take a break, Dato’ Zulkefli continued to give the talk on the Conditions of Contract. On this evening session, he is expertise on this topic as he is a consultant and he had a lot of experiences on dealing contracts. He explained the meaning and how to understand contracts. He also emphasized on the rights of contractor. At the end of the talks, the students were given opportunities to ask questions to him. Lastly, Dato’ Zulkefli was given an appreciation gift for giving and sharing knowledge and also experiences that he had.

160418.1   160418.2

 

 

INDUSTRIAL TALK : “AWARENESS TOWARDS THE INDUSTRY :BUILDING SERVICES”

This Industrial Talk held on 20 March 2018, at Auditorium 3, Shared Facilities, Pagoh Eduhub. This programme consists of 4 main parts which are introduction, talks, questions and answers slot and closing. For the introduction part, it was delivered by Faculty of Engineering Technology very own Adjunct Professor, Dato’ Sr Zulkefli Bin Mohd Zain. In his opening speech, the most highlighted content is that every engineer today need to be skilful and able to master in various fields give it technical, law and regulations, management and even entrepreneurship. The ability to master these kinds of fields will upsurge the value of an engineer and thus, create a higher demand of that particular engineer in industry. In this session, Dato’ Sr Zulkefli shared his personal experiences dealing with many people from many background including legislation, business and management. These inspiring stories will surely enhancing students’ intense to learn more and to do more in their future. The next session is the most vital part of the programme which is the talk on awareness towards the industry: building services. In this part, many important aspects of building services were covered by Dato’ Sr Zulkefli and his Mechanical Engineer, Ir Mardianto Hj Asli. Among the topics covered are fire and security, air-conditioning system, piping, plumbing and green technology. Every aspects covered are provided with details information on what is the definition of the system, how the system running and many more. These information are very helpful and needed by the students to increase their understanding on their future. Questions and answers slot is the next part of the programme. In this session, students are open to ask any questions related to the topics covered in the previous session. Much confusions from the student regarding building services are solved by the answers provided by both panels. Last but not least is the closing session. In this session, Dato Sr’ Zulkefli summed up the talks with few inspiring stories, his hope and vision of future engineer technologist produced by UTHM. The programme ended after souvenirs giving ceremony and photograph session.

190318 1

 

INDUSTRIAL TALK : “Integrated Construction Project (ICP)”

Pada 11 Mac 2018 yang jatuh pada hari Ahad, Professor Adjung Dato’ Sr. Zulkiflil bin Mohd. Zain telah sudi datang ke UTHM untuk memberikan taklimat berkaitan Integrated Construction Project (ICP) untuk Kelas 3 BNC pada jam 2.00 – 5.00 petang di bilik BK7. Beliau telah berkongsi pengalaman beliau di dalam projek Cadangan Membina Dua (2) Blok (537 Unit) Perumahan Rakyat Mampan Di Atas Sebahagian Lot 55511 (Pt9204), 55964 (Pt7246), Pt9110 Untuk Projek Usahasama Di Antara Tetuan Dewan Bandaraya Kuala Lumpur & Tetuan Retro Highland Sdn.Bhd. (Phase 1b). Taklimat yang padat, berisi dan penuh semangat yang disampaikan sedikit sebanyak membantu dalam pelaksanan kursus ICP yang sedang dilalui oleh pelajar. Selain itu, Prof. juga memberi banyak motivasi dan semangat kepada pelajar dalam persediaan menghadapi cabaran di dunia pekerjaan nanti. Disamping itu, Prof. juga menyatakan kesediaan beliau untuk membantu pelajar dalam pelaksanaan kursus ICP.040318 1

 

 

 

 

 

 


  

PUBLICATION

The listing of publication CLICK HERE

 

AWARD

Awards and publication is intended to support participants who promote the visibility reputation of Faculty of Engineering Technology at High Education Hub, UTHM Pagoh Campus through the dissemination of research in indexed journals. The awards are designed to recognize research that aligns to digital teaching and learning, civic learning and community engagement in higher education for the global common/public good, and workplace competence development and assessment. Most established academic disciplines have their own journals and other outlets for publication, although many academic journals are somewhat interdisciplinary, and publish work from several distinct fields or subfields. There is also a tendency for existing journals to divide into specialized sections as the field itself becomes more specialized. Along with the variation in review and publication procedures, the kinds of publications that are accepted as contributions to knowledge or research differ greatly among fields and subfields. Thus, this awards publication tendency to give an inspiration and motivate student directly to innovate new product and be creative in production.

 

International Research and Innovation  Symposium and Exposition (RISE) 2018

 Venue : UTHM Main campus, Parit Raja,  Batu Pahat, Johor. Date : 12 November - 13 November 2018. Time: 8 am - 5. pm. 

 

 

 

 

 

 

Research and Innovation Technology Competition (RITEC) 2018

Venue : FTK, UTHM Pagoh Campus. Date : 17 - 19 September 2018. Time: 8 am - 5 pm. 

 


 Selusuri JTKA

Selusuri JTKA Edisi 1 (2018)    >CLICK HERE

Selusuri JTKA Edisi 2 (2018)    >

2


 UNIVERSITI TUN HUSSEIN ONN MALAYSIA, PAGOH HIGHER EDUCATION HUB, 84600 PAGOH, MUAR, JOHOR.